|
|
|
|
Intermediate attachments are important to any Bird Net job. They hold the cable against the wall or structure, ensuring there are no wide gaps wide for birds to squeeze through. Intermediate bird net attachments should be spaced as follows:
2" Netting = every 2-3 feet
1-1/8" Netting = every 1-2 feet
3/4" Netting = every 1-2 feet (preferrably less than 18")
BirdBusters offers a variety of intermediate attachments to secure bird net to any substrate. |
 wood |
 concrete/masonry |
 Steel |
|
| Click on any product photo for enlarged view |
|
Lag Screw
Screw directly into wood using special tool or use with anchor for masonry. 100 per pack.
| Lag Screw SS small |
NI-NS10 |
$80.00 |
|
| Plastic Anchor Small |
NI-NS12 |
$2.85 |
|
| Lag Screw Galvanized |
NI-NS25 |
$22.00 |
|
|
|
Screw Eyes (Small)
These screws for wood are very sturdy intermediates.
| Screw Eye Small Galv (100) |
NI-SE10 |
$18.00 |
|
| Screw Eye Small SS (20) |
NI-SE20 |
$16.00 |
|
|
|
Net Spike
A hammer-in attachment that can be used in stone, concrete or sound brick work. Provides a very discreet head to thread the cable. Galvanized metal net spike needs a 4.8mm drill bit for hole; 100 per pack.
|
|
Hilti Loop - Open & Closed
Constructed of high quality, zinc-plated steel, the Hilti Loop is easy to use on stone, concrete or brick. Drill a 8mm hole and hammer it home. Open option for removable nets. 100 per pack.
| Hilti Closed Loop |
NI-H100 |
$110.00 |
|
| Hilti Open Loop |
NI-H200 |
$200.00 |
|
|
|
Multi-Purpose Cable Bracket
This versatile stainless steel bracket is used as an end or intermediate bracket and installed as either a permanent fixutre or as a quick-release cable holder. Can be attached to steel, wood, sheet metal or masonry. 100 per pack.
| Cable Bracket |
NI-CB10 |
$37.00 |
|
|
|
Multi-Purpose Cable Bracket with Hilti Pin
The same versatile stainless steel bracket with a strong Hilti Pin to make attaching to steel or concrete a snap. Just load the pin in the gun and fire. 100 per pack.
| Cable Bracket w/ Hilti Pin |
NI-CB15 |
$145.00 |
|
|
|
Roof Tile Clip
Ideal way to hold bird net cable down to tiles. This stainless steel fastener slides under Spanish tile, or screws under composite tiles. 10 per pack.
| Roof Tile Clip |
NI-ST10 |
$17.00 |
|
|
|
Kwik Tog & Eye Loop (for stucco)
Durable plastic fastener affords a solid base for the screw eye in stucco. Drill a 3/8" hole, insert the Kwik Tog so it expands behind the stucco. 50 pairs per pack.
| Kwik Tog & Eye Loop |
NI-KT10 |
$28.00 |
|
|
|
Net Loop
Low-profile, stainless steel cable run attachment for wood or metal. Secure with self-tapping screw. 100 per pack.
|
|
Thin Wire Net Clip
Great for small bird net jobs, this stainless steel clip attaches bird netting to a structure without running a bird net cable attachment system. 100 per pack.
| Thin Wire Net Clip |
NI-WC10 |
$24.00 |
|
|
|
Split Pins & Anchor Rivets
One of the strongest and most discreet intermediate systems to attach bird netting to stone, masonry or brick. Insert plastic anchor into pre-drilled 6.5mm hole and hammer stainless steel split pin home. Two lengths available depending on substrate integrity and use. 100 per pack.
| Anchor Rivet 1" |
NI-AR10 |
$19.00 |
|
| Split Pin 1" |
NI-SP10 |
$24.00 |
|
| Anchor Rivet 1.5" |
NI-AR15 |
$30.00 |
|
| Split Pin 1.5" |
NI-SP15 |
$26.00 |
|
|
 |
Girder Clips
Strong, hammer-on clips attaches cable to hard-to-drill steel surfaces. Hammer clip onto edge of I-beam with cable running inside clip (not through hole) for secure connection (see second photo.) Galvanized; 100 per pack.
| Girder Clip 3/32"-9/64" |
NI-GC10 |
$65.00 |
|
| Girder Clip 1/8"-1/4" |
NI-GC20 |
$70.00 |
|
| Girder Clip 5/16"-1/2" |
NI-GC30 |
$75.00 |
|
| Girder Clip 9/16"-3/4" |
NI-GC40 |
$115.00 |
|
|
|
View corner attachments available for bird net system
View bird net tools and support system
Return to main bird net hardware page
Click here to return to main Bird Net page.
|
|
